caml-list - the Caml user's mailing list
 help / Atom feed
* [Caml-list] Camlp4-free implementation of stream parsers (was camlp4 & OCaml 4.08)
       [not found]       ` <393603fa-0efa-5714-82da-ba4bc3e869b8@baturin.org>
@ 2019-07-24 15:10         ` Jocelyn Sérot
  2019-07-24 15:31           ` Daniil Baturin
  0 siblings, 1 reply; 5+ messages in thread
From: Jocelyn Sérot @ 2019-07-24 15:10 UTC (permalink / raw)
  To: Daniil Baturin; +Cc: caml users

Hi Daniil (and everyone interested by the subject),

Did you have a closer look at this ? 

I’m still hesitating between these three approaches for replacing the implementation of the small arithm expression parser used in Lascar [1] :

i. rewrite it using the basic fns provided by the Stream library (pro: no additionnal dependency, cons: not so trivial..)

ii. replace camlp4 by camlp5 (pro: straightforward, cons: long term maintainability of camlp5 (?)) 

iii. rewrite it using ocamlex/menhir and embed it in the main code (pro: « standard » soon; cons: a bit heavy)

Jocelyn

[1] https://github.com/jserot/lascar/blob/master/src/lib/fsm_expr.ml, lines 70–112

Le 2 juil. 2019 à 11:25, Daniil Baturin <daniil@baturin.org> a écrit :

> Hi Jocelyn,
> Camlp5 is still sort of maintained, but I don't think it's going to be
> developed beyond compatibility updates.
> For syntax extensions, everyone is switching to PPX.
> 
> From a quick look, it seems like the only bit of camlp4 you use is
> stream expressions.
> This is one of the things PPX can't do (on purpose, since it doesn't
> allow _arbitrary_ extensions),
> but I don't think just using streams directly is going to make code much
> longer.
> 
> Or I missed some other camlp4 bits?
> 
> I'm ready to work on a patch if you are open to it.
> 
> On 7/2/19 1:44 PM, Jocelyn Sérot wrote:
>> Le 29 juin 2019 à 17:15, Daniil Baturin <daniil@baturin.org> a écrit :
>> 
>>> Perhaps we should make some coordinated effort to help them.
>>> I've just sent a pull request to the ocamldot maintainer that enables
>>> the graphviz files parsing and printing modules
>>> to build and work with 4.08. The GTK parts have their own issues.
>>> Next I'm going to look into LASCAR/RFSM (packages that interest me first ;).
>>> 
>> Hi Daniil,
>> 
>> I’ve been been thinking of removing the dependency of Lascar and RFSM on camlp4 for a while.
>> Is switching to CamlP5 a good alternative ? 
>> 
>> Jocelyn
>> 
>> 
> 
> 


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [Caml-list] Camlp4-free implementation of stream parsers (was camlp4 & OCaml 4.08)
  2019-07-24 15:10         ` [Caml-list] Camlp4-free implementation of stream parsers (was camlp4 & OCaml 4.08) Jocelyn Sérot
@ 2019-07-24 15:31           ` Daniil Baturin
  0 siblings, 0 replies; 5+ messages in thread
From: Daniil Baturin @ 2019-07-24 15:31 UTC (permalink / raw)
  To: Jocelyn Sérot; +Cc: caml users

Hi Jocelyn,

I've completed the first version of my project, so now I can start
looking into this again!

There's a third option: parser combinators like angstrom.
My experience with Menhir is very positive though. After initial
struggle, I came to like its new incremental API and declarative error
reporting.

Here's my parser for an extended BNF:
Menhir grammar:
https://github.com/dmbaturin/bnfgen/blob/master/src/bnf_parser.mly
Parser driver that feeds it tokens:
https://github.com/dmbaturin/bnfgen/blob/master/src/parse_bnf.ml
Error messages:
https://github.com/dmbaturin/bnfgen/blob/master/src/bnf_parser.messages
Error message module build:
https://github.com/dmbaturin/bnfgen/blob/master/src/dune#L6-L8

On 7/24/19 10:10 PM, Jocelyn Sérot wrote:
> Hi Daniil (and everyone interested by the subject),
>
> Did you have a closer look at this ? 
>
> I’m still hesitating between these three approaches for replacing the implementation of the small arithm expression parser used in Lascar [1] :
>
> i. rewrite it using the basic fns provided by the Stream library (pro: no additionnal dependency, cons: not so trivial..)
>
> ii. replace camlp4 by camlp5 (pro: straightforward, cons: long term maintainability of camlp5 (?)) 
>
> iii. rewrite it using ocamlex/menhir and embed it in the main code (pro: « standard » soon; cons: a bit heavy)
>
> Jocelyn
>
> [1] https://github.com/jserot/lascar/blob/master/src/lib/fsm_expr.ml, lines 70–112
>
> Le 2 juil. 2019 à 11:25, Daniil Baturin <daniil@baturin.org> a écrit :
>
>> Hi Jocelyn,
>> Camlp5 is still sort of maintained, but I don't think it's going to be
>> developed beyond compatibility updates.
>> For syntax extensions, everyone is switching to PPX.
>>
>> From a quick look, it seems like the only bit of camlp4 you use is
>> stream expressions.
>> This is one of the things PPX can't do (on purpose, since it doesn't
>> allow _arbitrary_ extensions),
>> but I don't think just using streams directly is going to make code much
>> longer.
>>
>> Or I missed some other camlp4 bits?
>>
>> I'm ready to work on a patch if you are open to it.
>>
>> On 7/2/19 1:44 PM, Jocelyn Sérot wrote:
>>> Le 29 juin 2019 à 17:15, Daniil Baturin <daniil@baturin.org> a écrit :
>>>
>>>> Perhaps we should make some coordinated effort to help them.
>>>> I've just sent a pull request to the ocamldot maintainer that enables
>>>> the graphviz files parsing and printing modules
>>>> to build and work with 4.08. The GTK parts have their own issues.
>>>> Next I'm going to look into LASCAR/RFSM (packages that interest me first ;).
>>>>
>>> Hi Daniil,
>>>
>>> I’ve been been thinking of removing the dependency of Lascar and RFSM on camlp4 for a while.
>>> Is switching to CamlP5 a good alternative ? 
>>>
>>> Jocelyn
>>>
>>>
>>



^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [Caml-list] Camlp4-free implementation of stream parsers (was camlp4 & OCaml 4.08)
       [not found] <C4399DA5-3383-4A7E-9546-0021083D6EF3@uca.fr>
@ 2019-07-25 10:28 ` Jocelyn Sérot
  2019-07-25 11:42   ` Gabriel Scherer
  0 siblings, 1 reply; 5+ messages in thread
From: Jocelyn Sérot @ 2019-07-25 10:28 UTC (permalink / raw)
  To: caml users

HI Daniil,

Thanks for the example. It clearly shows how to embed a Menhir-specified parser into an existing program.

I still think, however that using Menhir for parsing arithmetic expressions is a bit overkill.

I’m having a look at Angstrom (and all the other parser combinator libs cited on the corresp. page).
It seems simpler. 

Jocelyn

Le 24 juil. 2019 à 17:31, Daniil Baturin <daniil@baturin.org> a écrit :

> Hi Jocelyn,
> 
> I've completed the first version of my project, so now I can start
> looking into this again!
> 
> There's a third option: parser combinators like angstrom.
> My experience with Menhir is very positive though. After initial
> struggle, I came to like its new incremental API and declarative error
> reporting.
> 
> Here's my parser for an extended BNF:
> Menhir grammar:
> https://github.com/dmbaturin/bnfgen/blob/master/src/bnf_parser.mly
> Parser driver that feeds it tokens:
> https://github.com/dmbaturin/bnfgen/blob/master/src/parse_bnf.ml
> Error messages:
> https://github.com/dmbaturin/bnfgen/blob/master/src/bnf_parser.messages
> Error message module build:
> https://github.com/dmbaturin/bnfgen/blob/master/src/dune#L6-L8
> 
> On 7/24/19 10:10 PM, Jocelyn Sérot wrote:
>> Hi Daniil (and everyone interested by the subject),
>> 
>> Did you have a closer look at this ? 
>> 
>> I’m still hesitating between these three approaches for replacing the implementation of the small arithm expression parser used in Lascar [1] :
>> 
>> i. rewrite it using the basic fns provided by the Stream library (pro: no additionnal dependency, cons: not so trivial..)
>> 
>> ii. replace camlp4 by camlp5 (pro: straightforward, cons: long term maintainability of camlp5 (?)) 
>> 
>> iii. rewrite it using ocamlex/menhir and embed it in the main code (pro: « standard » soon; cons: a bit heavy)
>> 
>> Jocelyn
>> 
>> [1] https://github.com/jserot/lascar/blob/master/src/lib/fsm_expr.ml, lines 70–112
>> 
>> Le 2 juil. 2019 à 11:25, Daniil Baturin <daniil@baturin.org> a écrit :
>> 
>>> Hi Jocelyn,
>>> Camlp5 is still sort of maintained, but I don't think it's going to be
>>> developed beyond compatibility updates.
>>> For syntax extensions, everyone is switching to PPX.
>>> 
>>> From a quick look, it seems like the only bit of camlp4 you use is
>>> stream expressions.
>>> This is one of the things PPX can't do (on purpose, since it doesn't
>>> allow _arbitrary_ extensions),
>>> but I don't think just using streams directly is going to make code much
>>> longer.
>>> 
>>> Or I missed some other camlp4 bits?
>>> 
>>> I'm ready to work on a patch if you are open to it.
>>> 
>>> On 7/2/19 1:44 PM, Jocelyn Sérot wrote:
>>>> Le 29 juin 2019 à 17:15, Daniil Baturin <daniil@baturin.org> a écrit :
>>>> 
>>>>> Perhaps we should make some coordinated effort to help them.
>>>>> I've just sent a pull request to the ocamldot maintainer that enables
>>>>> the graphviz files parsing and printing modules
>>>>> to build and work with 4.08. The GTK parts have their own issues.
>>>>> Next I'm going to look into LASCAR/RFSM (packages that interest me first ;).
>>>>> 
>>>> Hi Daniil,
>>>> 
>>>> I’ve been been thinking of removing the dependency of Lascar and RFSM on camlp4 for a while.
>>>> Is switching to CamlP5 a good alternative ? 
>>>> 
>>>> Jocelyn
>>>> 
>>>> 
>>> 
> 
> 



^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [Caml-list] Camlp4-free implementation of stream parsers (was camlp4 & OCaml 4.08)
  2019-07-25 10:28 ` Jocelyn Sérot
@ 2019-07-25 11:42   ` Gabriel Scherer
  2019-07-25 15:21     ` Jocelyn Sérot
  0 siblings, 1 reply; 5+ messages in thread
From: Gabriel Scherer @ 2019-07-25 11:42 UTC (permalink / raw)
  To: Jocelyn Sérot; +Cc: caml users

[-- Attachment #1: Type: text/plain, Size: 5053 bytes --]

Hi,

The parser from
https://github.com/jserot/lascar/blob/master/src/lib/fsm_expr.ml seems
fairly trivial, have you considered just rewriting it to use the functions
of the Stream primitives directly?

For example, roughly (I have not tried to type-check or test the code),

    let rec aux = parser
    | [< 'Int n when n<0; t=aux >] -> [< 'Kwd "-"; 'Int (-n); t >]
    | [< 'h; t=aux >] -> [< 'h; t >]
    | [< >] -> [< >] in

would become

    let aux s =
      let next = ref [] in
      Stream.from @@ fun _ ->
        match !next with
        | tok::toks -> next := toks; Some tok
        | [] -> match Stream.next with
                | exception Stream.Failure -> None
                | Int n when n < 0 ->
                  next := [Int (-n)];
                  Some (Kwd "-")
                | tok -> Some tok

and

    let rec p_exp0  = parser
    | [< 'Int n >] -> EConst n
    | [< 'Ident i >] -> EVar i
    | [< 'Kwd "("; e=p_exp ; 'Kwd ")" >] -> e

becomes

    let rec p_exp0 s = match Stream.next s with
    | Int n -> EConst n
    | Ident i -> EVar i
    | Kwd "(" ->
      let e = p_exp s in
      match Stream.peek s with
      | Some (Kwd ")") -> Stream.junk s; e
      | _ -> raise Stream.Failure

This is not exactly exciting code to write, but it's not a lot of work
either for such a simple grammar.

On Thu, Jul 25, 2019 at 12:28 PM Jocelyn Sérot <jocelyn.serot@uca.fr> wrote:

> HI Daniil,
>
> Thanks for the example. It clearly shows how to embed a Menhir-specified
> parser into an existing program.
>
> I still think, however that using Menhir for parsing arithmetic
> expressions is a bit overkill.
>
> I’m having a look at Angstrom (and all the other parser combinator libs
> cited on the corresp. page).
> It seems simpler.
>
> Jocelyn
>
> Le 24 juil. 2019 à 17:31, Daniil Baturin <daniil@baturin.org> a écrit :
>
> > Hi Jocelyn,
> >
> > I've completed the first version of my project, so now I can start
> > looking into this again!
> >
> > There's a third option: parser combinators like angstrom.
> > My experience with Menhir is very positive though. After initial
> > struggle, I came to like its new incremental API and declarative error
> > reporting.
> >
> > Here's my parser for an extended BNF:
> > Menhir grammar:
> > https://github.com/dmbaturin/bnfgen/blob/master/src/bnf_parser.mly
> > Parser driver that feeds it tokens:
> > https://github.com/dmbaturin/bnfgen/blob/master/src/parse_bnf.ml
> > Error messages:
> > https://github.com/dmbaturin/bnfgen/blob/master/src/bnf_parser.messages
> > Error message module build:
> > https://github.com/dmbaturin/bnfgen/blob/master/src/dune#L6-L8
> >
> > On 7/24/19 10:10 PM, Jocelyn Sérot wrote:
> >> Hi Daniil (and everyone interested by the subject),
> >>
> >> Did you have a closer look at this ?
> >>
> >> I’m still hesitating between these three approaches for replacing the
> implementation of the small arithm expression parser used in Lascar [1] :
> >>
> >> i. rewrite it using the basic fns provided by the Stream library (pro:
> no additionnal dependency, cons: not so trivial..)
> >>
> >> ii. replace camlp4 by camlp5 (pro: straightforward, cons: long term
> maintainability of camlp5 (?))
> >>
> >> iii. rewrite it using ocamlex/menhir and embed it in the main code
> (pro: « standard » soon; cons: a bit heavy)
> >>
> >> Jocelyn
> >>
> >> [1] https://github.com/jserot/lascar/blob/master/src/lib/fsm_expr.ml,
> lines 70–112
> >>
> >> Le 2 juil. 2019 à 11:25, Daniil Baturin <daniil@baturin.org> a écrit :
> >>
> >>> Hi Jocelyn,
> >>> Camlp5 is still sort of maintained, but I don't think it's going to be
> >>> developed beyond compatibility updates.
> >>> For syntax extensions, everyone is switching to PPX.
> >>>
> >>> From a quick look, it seems like the only bit of camlp4 you use is
> >>> stream expressions.
> >>> This is one of the things PPX can't do (on purpose, since it doesn't
> >>> allow _arbitrary_ extensions),
> >>> but I don't think just using streams directly is going to make code
> much
> >>> longer.
> >>>
> >>> Or I missed some other camlp4 bits?
> >>>
> >>> I'm ready to work on a patch if you are open to it.
> >>>
> >>> On 7/2/19 1:44 PM, Jocelyn Sérot wrote:
> >>>> Le 29 juin 2019 à 17:15, Daniil Baturin <daniil@baturin.org> a écrit
> :
> >>>>
> >>>>> Perhaps we should make some coordinated effort to help them.
> >>>>> I've just sent a pull request to the ocamldot maintainer that enables
> >>>>> the graphviz files parsing and printing modules
> >>>>> to build and work with 4.08. The GTK parts have their own issues.
> >>>>> Next I'm going to look into LASCAR/RFSM (packages that interest me
> first ;).
> >>>>>
> >>>> Hi Daniil,
> >>>>
> >>>> I’ve been been thinking of removing the dependency of Lascar and RFSM
> on camlp4 for a while.
> >>>> Is switching to CamlP5 a good alternative ?
> >>>>
> >>>> Jocelyn
> >>>>
> >>>>
> >>>
> >
> >
>
>
>

[-- Attachment #2: Type: text/html, Size: 8298 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [Caml-list] Camlp4-free implementation of stream parsers (was camlp4 & OCaml 4.08)
  2019-07-25 11:42   ` Gabriel Scherer
@ 2019-07-25 15:21     ` Jocelyn Sérot
  0 siblings, 0 replies; 5+ messages in thread
From: Jocelyn Sérot @ 2019-07-25 15:21 UTC (permalink / raw)
  To: Gabriel Scherer; +Cc: caml users

[-- Attachment #1: Type: text/plain, Size: 7990 bytes --]

Thanks for the suggestion, Gabriel.

It is indeed less tiresome that i had imagined.

I attach the corresponding full code (with original camlp4 formulation in comment).
Handling of the minus operator is here handled before parsing; this is not a problem since such a parser is supposed to be called on very small strings in practice.

Jocelyn

ps : i’m still wondering whether some library and/or ppx-based  generic (afap) implementation of Camlp4 stream parsers is possible..

8<—— Stream-based parser for simple arithmetic expressions (with non-negative integers)

type ident = string 

type value = int 

type t = 
  EConst of value              (** Constants *)   
| EVar of ident                (** Input, output or local variable *)
| EBinop of string * t * t     (** Binary operation *)

let keywords = ["+"; "-"; "*"; "/"; "("; ")"]

let mk_binary_minus s = s |> String.split_on_char '-' |> String.concat " - "
                      
let lexer s = s |> mk_binary_minus |> Stream.of_string |> Genlex.make_lexer keywords 

open Genlex

(* let rec p_exp0  = parser
 *                 | [< 'Int n >] -> EConst n
 *                 | [< 'Ident i >] -> EVar i
 *                 | [< 'Kwd "("; e=p_exp ; 'Kwd ")" >] -> e *)

let rec p_exp0 s =
  match Stream.next s with
    | Int n -> EConst n
    | Ident i -> EVar i
    | Kwd "(" ->
       let e = p_exp s in
       begin match Stream.peek s with
       | Some (Kwd ")") -> Stream.junk s; e
       | _ -> raise Stream.Failure
       end
    | _ -> raise Stream.Failure

(* and p_exp1  = parser
 *             | [< e1=p_exp0 ; rest >] -> p_exp2  e1 rest *)

and p_exp1 s =
  let e1 = p_exp0 s in
  p_exp2 e1 s
  
(* and p_exp2  e1 = parser
 *                | [< 'Kwd "*"; e2=p_exp1  >] -> EBinop("*", e1, e2)
 *                | [< 'Kwd "/"; e2=p_exp1  >] -> EBinop("/", e1, e2)
 *                | [< >] -> e1 *)

and p_exp2 e1 s =
  match Stream.peek s with
  | Some (Kwd "*") -> Stream.junk s; let e2 = p_exp1 s in EBinop("*", e1, e2)
  | Some (Kwd "/") -> Stream.junk s; let e2 = p_exp1 s in EBinop("/", e1, e2)
  | _ -> e1
  
(* and p_exp  = parser
 *            | [< e1=p_exp1 ; rest >] -> p_exp3  e1 rest *)

and p_exp s =
  let e1 = p_exp1 s in p_exp3 e1 s
                     
(* and p_exp3  e1 = parser
 *                | [< 'Kwd "+"; e2=p_exp  >] -> EBinop("+", e1, e2)
 *                | [< 'Kwd "-"; e2=p_exp  >] -> EBinop("-", e1, e2)
 *                | [< >] -> e1 *)

and p_exp3 e1 s =
  match Stream.peek s with
  | Some (Kwd "+") -> Stream.junk s; let e2 = p_exp s in EBinop("+", e1, e2)
  | Some (Kwd "-") -> Stream.junk s; let e2 = p_exp s in EBinop("-", e1, e2)
  | _ -> e1

let parse s = s |> lexer |> p_exp


Le 25 juil. 2019 à 13:42, Gabriel Scherer <gabriel.scherer@gmail.com> a écrit :

> Hi,
> 
> The parser from https://github.com/jserot/lascar/blob/master/src/lib/fsm_expr.ml seems fairly trivial, have you considered just rewriting it to use the functions of the Stream primitives directly?
> 
> For example, roughly (I have not tried to type-check or test the code),
> 
>     let rec aux = parser
>     | [< 'Int n when n<0; t=aux >] -> [< 'Kwd "-"; 'Int (-n); t >]
>     | [< 'h; t=aux >] -> [< 'h; t >]
>     | [< >] -> [< >] in
> 
> would become
> 
>     let aux s =
>       let next = ref [] in
>       Stream.from @@ fun _ ->
>         match !next with
>         | tok::toks -> next := toks; Some tok
>         | [] -> match Stream.next with
>                 | exception Stream.Failure -> None
>                 | Int n when n < 0 ->
>                   next := [Int (-n)];
>                   Some (Kwd "-")
>                 | tok -> Some tok
>  
> and
> 
>     let rec p_exp0  = parser
>     | [< 'Int n >] -> EConst n
>     | [< 'Ident i >] -> EVar i
>     | [< 'Kwd "("; e=p_exp ; 'Kwd ")" >] -> e        
> 
> becomes
> 
>     let rec p_exp0 s = match Stream.next s with
>     | Int n -> EConst n
>     | Ident i -> EVar i
>     | Kwd "(" ->
>       let e = p_exp s in
>       match Stream.peek s with
>       | Some (Kwd ")") -> Stream.junk s; e
>       | _ -> raise Stream.Failure
> 
> This is not exactly exciting code to write, but it's not a lot of work either for such a simple grammar.
> 
> On Thu, Jul 25, 2019 at 12:28 PM Jocelyn Sérot <jocelyn.serot@uca.fr> wrote:
> HI Daniil,
> 
> Thanks for the example. It clearly shows how to embed a Menhir-specified parser into an existing program.
> 
> I still think, however that using Menhir for parsing arithmetic expressions is a bit overkill.
> 
> I’m having a look at Angstrom (and all the other parser combinator libs cited on the corresp. page).
> It seems simpler. 
> 
> Jocelyn
> 
> Le 24 juil. 2019 à 17:31, Daniil Baturin <daniil@baturin.org> a écrit :
> 
> > Hi Jocelyn,
> > 
> > I've completed the first version of my project, so now I can start
> > looking into this again!
> > 
> > There's a third option: parser combinators like angstrom.
> > My experience with Menhir is very positive though. After initial
> > struggle, I came to like its new incremental API and declarative error
> > reporting.
> > 
> > Here's my parser for an extended BNF:
> > Menhir grammar:
> > https://github.com/dmbaturin/bnfgen/blob/master/src/bnf_parser.mly
> > Parser driver that feeds it tokens:
> > https://github.com/dmbaturin/bnfgen/blob/master/src/parse_bnf.ml
> > Error messages:
> > https://github.com/dmbaturin/bnfgen/blob/master/src/bnf_parser.messages
> > Error message module build:
> > https://github.com/dmbaturin/bnfgen/blob/master/src/dune#L6-L8
> > 
> > On 7/24/19 10:10 PM, Jocelyn Sérot wrote:
> >> Hi Daniil (and everyone interested by the subject),
> >> 
> >> Did you have a closer look at this ? 
> >> 
> >> I’m still hesitating between these three approaches for replacing the implementation of the small arithm expression parser used in Lascar [1] :
> >> 
> >> i. rewrite it using the basic fns provided by the Stream library (pro: no additionnal dependency, cons: not so trivial..)
> >> 
> >> ii. replace camlp4 by camlp5 (pro: straightforward, cons: long term maintainability of camlp5 (?)) 
> >> 
> >> iii. rewrite it using ocamlex/menhir and embed it in the main code (pro: « standard » soon; cons: a bit heavy)
> >> 
> >> Jocelyn
> >> 
> >> [1] https://github.com/jserot/lascar/blob/master/src/lib/fsm_expr.ml, lines 70–112
> >> 
> >> Le 2 juil. 2019 à 11:25, Daniil Baturin <daniil@baturin.org> a écrit :
> >> 
> >>> Hi Jocelyn,
> >>> Camlp5 is still sort of maintained, but I don't think it's going to be
> >>> developed beyond compatibility updates.
> >>> For syntax extensions, everyone is switching to PPX.
> >>> 
> >>> From a quick look, it seems like the only bit of camlp4 you use is
> >>> stream expressions.
> >>> This is one of the things PPX can't do (on purpose, since it doesn't
> >>> allow _arbitrary_ extensions),
> >>> but I don't think just using streams directly is going to make code much
> >>> longer.
> >>> 
> >>> Or I missed some other camlp4 bits?
> >>> 
> >>> I'm ready to work on a patch if you are open to it.
> >>> 
> >>> On 7/2/19 1:44 PM, Jocelyn Sérot wrote:
> >>>> Le 29 juin 2019 à 17:15, Daniil Baturin <daniil@baturin.org> a écrit :
> >>>> 
> >>>>> Perhaps we should make some coordinated effort to help them.
> >>>>> I've just sent a pull request to the ocamldot maintainer that enables
> >>>>> the graphviz files parsing and printing modules
> >>>>> to build and work with 4.08. The GTK parts have their own issues.
> >>>>> Next I'm going to look into LASCAR/RFSM (packages that interest me first ;).
> >>>>> 
> >>>> Hi Daniil,
> >>>> 
> >>>> I’ve been been thinking of removing the dependency of Lascar and RFSM on camlp4 for a while.
> >>>> Is switching to CamlP5 a good alternative ? 
> >>>> 
> >>>> Jocelyn
> >>>> 
> >>>> 
> >>> 
> > 
> > 
> 
> 


[-- Attachment #2: Type: text/html, Size: 17622 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-27 13:45 [Caml-list] camlp4 & OCaml 4.08 Richard W.M. Jones
2019-06-29  9:06 ` Anil Madhavapeddy
2019-06-29 15:15   ` Daniil Baturin
     [not found]     ` <5CE377AD-CB06-4261-BD26-A2A697253F02@uca.fr>
     [not found]       ` <393603fa-0efa-5714-82da-ba4bc3e869b8@baturin.org>
2019-07-24 15:10         ` [Caml-list] Camlp4-free implementation of stream parsers (was camlp4 & OCaml 4.08) Jocelyn Sérot
2019-07-24 15:31           ` Daniil Baturin
     [not found] <C4399DA5-3383-4A7E-9546-0021083D6EF3@uca.fr>
2019-07-25 10:28 ` Jocelyn Sérot
2019-07-25 11:42   ` Gabriel Scherer
2019-07-25 15:21     ` Jocelyn Sérot

caml-list - the Caml user's mailing list

Archives are clonable: git clone --mirror https://inbox.ocaml.org/caml-list

AGPL code for this site: git clone https://public-inbox.org/ public-inbox